Products
Contact us
Telephone: 13813577928
E-mail: atdry@126.com
Fax: 0519-88672859
Address: 8 Dongtang Road, Sanhekou Industrial Park, Zhenglu Town, Tianning District, Changzhou, China
Air dryer series
QG pulse air dryer
Detailed description
characteristic:
QG series pulse air flow dryer is a kind of mass drying equipment. It adopts the principle of instant drying, and uses the rapid movement of hot air to drive the wet materials, so that the wet materials are suspended in the hot air. In this way, the whole drying process is strengthened, and the rate of heat and mass transfer is improved. After air flow drying, the non combined moisture of the materials can be almost completely removed, and the drying process is stable Compared with the ordinary dryers, the output of the product can be significantly improved, and the users can obtain higher economic benefits in a short time.
Suitable materials:
This type of equipment is suitable for many materials. In addition to the materials mentioned in the basic type, there are: Hypnone, A.B.C intermediate, a.b.s resin, A.S.C, silica, phenylpyrazolone, tea meal, oxalic acid catalyst, accelerator m.d.m, catalyst, precipitated carbon powder, p-acetyl-n-benzenesulfonylamine, p-aminosalicylic acid, domatol, p-phenylenedioic acid and diethylbenzene Ammonium, titanium dioxide, activated carbon, sodium fluosilicate, fluorspar, silica powder, synthetic resin, calcium phosphate, polypropylene resin, chlortetracycline, sodium pyrosilicate, caffeic acid, tetracycline, iron oxide, calcium carbonate, corn gluten, iron oxide, gypsum retarder, etc.
Key recommendation: used for drying wood flour, sawdust, rice bran and bran
The above materials have special characteristics: light specific gravity, difficult feeding, flammable and explosive. In view of this situation, the new air flow dryer developed by the technical department of our company has improved the feeding form on the basis of the original air flow dryer and solved the "bridging" phenomenon. The cyclone separator is innovated and improved to solve the problem that the material can not be discharged due to rolling. System integration, advanced control, overtemperature alarm interlock and close the heat source, effectively solve the problem of combustion and explosion caused by too high temperature.
Technical parameter table:
Model | Evaporation moisture(kg/h) | Installed power(Kw) | Area covered(m2) | Height(m) |
QG50 | 50 | 7 | 20 | 14 |
QG100 | 100 | 13 | 32 | 14 |
QG200* | 200 | 21 | 40 | 15 |
QG250 | 250 | 24 | 64 | 15 |
QG500 | 500 | 43 | 96 | 18 |
QG1000* | 1000 | 100 | 120 | 18 |
QG1500* | 1500 | 150 | 200 | 20 |
Note: some parameters are adjusted according to different materials, and the design shall prevail.
Pre:No Prev