Products
Contact us
Telephone: 13813577928
E-mail: atdry@126.com
Fax: 0519-88672859
Address: 8 Dongtang Road, Sanhekou Industrial Park, Zhenglu Town, Tianning District, Changzhou, China
Hybrid equipment series
Wldh series horizontal screw belt mixer
Detailed description
Working principle of horizontal screw belt mixer
The horizontal screw belt mixer is driven by the internal and external diameter screw installed on the mixing shaft to turn the material inside the barrel, so that the agitator can turn over the material in a large range. In the structure of the agitator, the screw is designed to be anti helix between the inside and the left and the left. During the operation of the mixer, the inner screw drives the material near the axis to rotate axially, and the axial direction is pushed from the inside to the two sides, while the outer screw drives the material near the cylinder wall to rotate axially from both sides to the inside, which causes the material to flow circulation and shear infiltration in the cylinder, and completes the material to be quickly and quickly in a short time Mix evenly.
Introduction of horizontal screw belt mixer
Under the feasibility factor, the mixing effect of the horizontal spiral belt mixer is not affected by the particle size and density, and it also has a good mixing effect for viscous materials.
The stable mixing process reduces the damage to fragile materials, and the flying knife structure also plays a role in crushing.
The horizontal structure has a lower body height and is easy to install.
In the mixing structure, the positive and negative rotating screw bars are installed on the same horizontal axis to form a low power mixing environment.
The horizontal screw belt mixer is mainly used in the production of putty powder, and can also be used as an entry-level insulation mortar mixer.
Technical parameters of horizontal screw belt mixer:
Model | Electric power(Kw) | Full volumeM3 | Spindle speedr/min | Mixing quantity kg | Dimensions | Equipment weight |
WLD-0.5 | 5.5 | 0.5 | 63 | 150~350 | 2372*812*1272 | 1050kg |
WLD-1.0 | 11 | 1.0 | 43 | 300~700 | 2700*1036*1574 | 1760Kg |
WLD-2.0 | 15 | 2.0 | 33 | 600~1400 | 3356*1236*1774 | 2500Kg |
WLD-3.0 | 18.5 | 3.0 | 33 | 900-2100 | 3356*1336*2024 | 3400Kg |
WLD-4.0 | 22 | 4.0 | 33 | 1200-2800 | 4210*1414*2108 | 4200Kg |
Note:
*The mixing amount in the table is the data measured with the powder with specific gravity of 1 as the medium. The selection of horizontal screw belt mixer should be calculated according to the mesh number, specific gravity and other parameters of the material.
*In case of high temperature, high pressure, inflammable, explosive, corrosive and other working conditions, detailed data must be provided for further selection and customization.
*The data in this table are subject to change without prior notice. The correct parameters are subject to the actual product of the horizontal screw belt mixer.
*This table does not include all the equipment information. Please contact our sales engineer for more information.
Function selection of horizontal screw belt mixer:
Discharging mode: manual, electric and pneumatic
Main shaft sealing mode: packing + hermetic mechanical seal
Agitator type: bidirectional continuous ribbon, unidirectional continuous ribbon, bidirectional break ribbon, unidirectional break ribbon
Driving mode: direct connected split type (belt / chain)
Mixer material: carbon steel material contact stainless steel (SS304 / SS316) all stainless steel (SS304 / SS316) internal coating
Spindle: single section multi section
Cylinder opening: standard flange opening, quick opening feeding opening, dust collector opening, manual feeding opening, side body cleaning door
Discharge valve: butterfly valve, ball valve, plum blossom valve and flap valve
Others: spray / spray heating / cooling / vacuum temporary sampling.
Pre:VI type forced mixing series mixer
Next:High speed mixer